Speeds and Feeds

Endmills:

1/16 endmill : 25ipm, 15 plunge, 3 on Dewalt dial.

1/8 endmill: 50ipm, 20 plunge, 3 on Dewalt dial.

​1/4 endmill:  100ipm, 30 plunge, 3 on Dewalt dial.

1/2 endmill: 100ipm, 30 plunge, 3 on Dewalt dial.

Compression:

1/8 compression: 50ipm, 20 plunge, 1/4 depth per pass, 3 on Dewalt dial.

V-Bits:

30 degree: 40ipm, 10 plunge, 3 on Dewalt dial

60 degree: 100ipm, 30 plunge, 3 on Dewalt dial.

90 degree: 100ipm, 30 plunge, 3 on Dewalt dial.

Spoil Board :

1 1/2 Spoil board bit: 150ipm, 5 plunge, 1mm depth per pass, 1 on Dewalt dial.